Cycle Terminal

OEM Style Japanese Motorcycle Electrical Connectors, Wiring Harness Connectors

We have Vintage and modern Sport-bike Motorcycle Wiring Harness electrical Connectors, these Connectors are purchase directly from the manufacturer, And in many cases the OEM Supplier, The terminals and connectors are superior quality. Most are Manufactured in the USA, Japan, or Europe.

Bullet Connectors, Yazaki, Sumitomo, Hitachi, 6.3mm - .250, 2.8mm - .110, 2.3mm - .090,

Connector Sets with terminals, Mini Relay Connectors, Voltage Regulator-Rectifier Connector for Honda,

H4 Headlight connector and couplers.

What's the Difference between the Male and Female Connector?

Male half of the connector, is the side that the male terminals fit into. Female Half of the connector is the side the female terminals fit into.

Sumitomo Wire Harness Tree Clips

                           Harness Clips can be found Here

Relay Sockets and

Base Holders

  Vintage Rubber CDI & Headlight Connectors

Honda Regulator/Rectifier Connector

5P250-312 $7.95 each

This connector has a combo of  two large .312 terminals on the bottom, and three smaller .250 terminals across the top.

This Connector is used on Honda Shadow Models, CB Models, CBR Models, NT, VF, XL and many others.

Sumitomo Motorcycle Starter Solenoid Connectors and Main Fuse Cover

A Special connector For most Honda, Yamaha, some Kawasaki, and Suzuki.

It has the Connector lock built into the Main Fuse cover.

These were very hard to find, and had a high cost.

These come with 4 terminals.

4 x.250 locking terminals for 14-18 gauge wire.

                           Solenoid Connectors can be found Here

Motorcycle Harness Connector covers

Another tough one to source.

These are the Same covers sold by Web Bike Japan.

These soft PVC covers can be found at the ends of the wiring harness or harness break-outs.

            Connector Covers

 JAE MX34 Series