3 and 4 circuit fuse box and Power Distribution Kits,based on the Metri Pack 280
connector system. These are sealed weatherproof units. With a little time and some
patients you'll be able to wire up all you accessories to one panel. all kinds of
options available for the Metri pack 280 connector system, gang terminals for grounds,
ultra micro relays, Diodes,Clear or Black covers. We also have Bussmann, and Littlefuse
mini ATM fuse holders, Made in USA.
And the Metri Pack 630 pull to seat ATC fuse holder, pre wired, or with loose terminals,
so you can wire it to your device. The 280 terminals provide some nice tight wire
crimps every time, very easy to work with.
The seal goes on the wire,the terminal gets crimped, the seal is then lightly crimped
in place with what would normally be the wire strain relief and insulation crimp.then
the TPA is installed to keep the wire and terminals aligned properly.
Now have High Quality Mini ATM Fuse at the bottom of the page!!!
Metri-Pack 280 - 3 Circuit Fuse Box -will hold 3 Mini ATM fuses COVERS SOLD BELOW
Great setup, very light, will hang from a properly secured harness, Terminals are
very easy to crimp and install. And the size is perfect to tuck away somewhere on
If you chose the 16-18, the set will come with the proper terminals for 16-18 AWG
Metri-Pack Connector Set for 16-18 AWG, Green seals included, they do a nice job
on the smaller 16 - 18 AWG cross-linked TXL wiring.
$5.15 each 3CFP 16-18
Metri-Pack Connector Set for 12-14 AWG, Gray seals included.