Cycle Terminal

OEM Style Fuse Boxes - Panels, Holders, Sockets, and Fuses

3 and 4 circuit fuse box and Power Distribution Kits based on the Metri Pack 280 connector system. These are sealed weatherproof units and with a little time and some patience you'll be able to wire up all you accessories to one panel. There all kinds of options available for the Metri pack 280 connector system, gang busbar for grounds, ultra micro relays, Diodes, Clear or Black covers. We also have Bussmann, and Littlefuse mini ATM fuse holders.

The Metri Pack 630 pull to seat ATC fuse holder, pre wired or with loose terminals so you can wire it to your device.

The 280 terminals provide some nice tight wire crimps every time and they are very easy to work with.

The seal goes on the wire, the terminal gets crimped, then the seal is then lightly crimped in place with what would normally be the wire strain relief and insulation crimp, the TPA is installed to keep the wire and terminals aligned properly.

Now have High Quality Mini ATM and ATC Fuses at the bottom of the page!!!

Metri-Pack 280 - 3 Circuit Fuse Box - will hold 3 Mini ATM fuses

COVERS SOLD SEPARATELY BELOW

Great setup, very light, will hang from a properly secured harness,

Terminals are very easy to crimp and install.

And the size is perfect to tuck away somewhere on a motorcycle.

If you chose the 16-18, the set will come with terminals and seals for 16-18 AWG wiring.

Metri-Pack Connector Set for 16-18 AWG, Green seals included, they do a nice job on the smaller 16 - 18 AWG cross-linked TXL wiring.

$5.15 each    3CFP 16-18

Metri-Pack Connector Set for 12-14 AWG, Gray seals included.

$5.35 each    3CFP 12-14

Fuses can be found at the bottom of this page              Crimp tool for these can be found at the bottom of the page.

Metri-Pack 280 3 Circuit

Fuse-Box Covers

These come in Black only

$1.80 each

Metri-Pack 280 3CFP Cover Black

Mini Fuses, Hi Quality Mini ATM and ATC Fuses by Cooper Bussmann, and Littlefuse

These are high Quality Fuses, Low profile, Made in Japan or North America

Wholesale pricing offered on quantities of 500 or more per type.

Metri-Pack 280 - 4 Circuit Power Distribution box, and Micro Relay base Socket

Will hold 4 Mini ATM uses COVERS SOLD BELOW

Great setup, very flexible with what can be done with it.

There are all kinds of goodies Available for this Distribution box

Bus bar, 1 x Ultra Micro relay only, diodes.

Metri-Pack Connector Set for 16-18 AWG,  

Green seals included for 16 - 18 AWG wiring.

$6.85 each    4CFP 16-18

Metri-Pack Connector Set for 12-14 AWG, Gray seals included.

$7.15 each    4CFP 12-14

Metri-Pack 280 4 circuit Distribution box Covers

These come in clear only.

Short when using fuses only.

and the tall covers for use with Micro relay’s.This is For Cover only

$3.55 each

4CFP Cover Short

$3.70 each

4CFP Cover Long

4 circuit Side Bracket Mount

This Bracket will fit the

Short or Long Covers above Only!

Metal Bracket Only!

$2.95 each

4CFP Mounting Bracket

Metri-Pack 280 Cover Clip

Inserts into the cover of the 3 Circuit box, for mounting purpose

Tough little bugger to get in there, its not coming loose.

$0.29 each 280 3CFP Clip

Clip only

Tree Clip for 3 Circuit Metri-pack Fuse Holder

$0.99 each Tree Clip

Tree clip only

Side Bracket for

3 Circuit Metri-pack Fuse Holder

$1.59 each Side Bracket

Side Bracket only

Metri-Pack 280 Terminal

Push to seat Terminals for

12 - 14 AWG

$0.25 each 280FT12-14

Metri-Pack 280 Terminal

Push to seat Terminals for

16 - 20 AWG

$0.22 each 280FT16-18

Metri-Pack 280 Terminal

Push to seat Terminals for

10 - 12 AWG

$0.28 each 280FT10-12

Metri-Pack 280 Connector Seal

Provides a Water tight seal between the wire and the Connector housing

$0.17 each   Green 16 - 18 AWG  

$0.17 each   Gray   12 - 14 AWG

$0.16 each   Blue   10 - 12 AWG  

Metri-Pack 280 Busbar

Busbar terminal for joining multiple grounds and Hot wires. Comes in 2, 3, 4, and 6 pin configuration.

$0.64 each   280 Bus bar 2  

Metri-Pack 280 Cavity Dummy Plug

Provides a Water tight seal at an empty wiring cavity.

$0.17 each  MP280 Cavity Plug

Metri-Pack 280 Busbar

Busbar terminal for joining multiple grounds and Hot wires.

Comes in 2 and 6 way configuration.

6 way busbar can be cut down 2, 3, 4 or 5 way.

$0.85 each   280 Bus bar 6  

ULTRA Micro Relay for Metri pack 280  Power Distribution Box

SONG CHUAN Ultra ISO 280 Micro Relay, 2.8mm terminal footprint, Space saving relay with high current capacity, SPNO Resistor Type, 4 terminals, Power consumption .96 Watts

Rated at 20 AMP's This is a nice little compact unit, designed for the Metri pack connector system..

Life expectancy Electrical(Min.)1.000.000 cycles.

I am using one now, So far so good, I’ll keep you posted.

At Just larger than a Quarter - This is one of the smallest relay’s I’ve come across.

$7.65  each   - SCMR20                                        You can find the Metri Pack Relay base here

Additional SC MR20 Relay Specs and Pin out here

Economy  - Open Barrel Crimp Tool  

For Metri-pack 280 and 480 Terminals and Seal 14 - 24 AWG  Made in USA

This tool does the wire crimp, then the insulation crimps in 2 steps.

If your not doing this type of crimping all the time, great tool to add to your box, and you cant beat the price. Pick up a few extra terminals to practice with.

These will not do the insulation crimp on the 110, 250 standard terminals      

                                                          $32.95 each   ECT41  

Open Barrel Crimp Tool  

For Metri-pack 280 and 480 Terminals and wire seals 14 - 18 AWG

Ratcheting Type - Made in USA

This one Works great.

This tool does the wire crimp, then the seal crimp in 2 steps.

Pick up a few extra terminals to practice with.

I only keep a couple in stock due to the high cost.

These will not do the insulation crimp on the 110, 250 standard terminals      

$94.95 each   DRCT509

For Help using crimp tools check out this link