OEM Style - Motorcycle Electrical Connectors - Honda Tail-Light Connector
Honda 3 pin Tail-light Connector
Special tail light connector used many on Honda Motorcycles.
Honda TL Female Terminal
16 - 20 awg (.5 - 1.25mm)
3 pin Honda Tail light Connector Natural
Comes Complete with Connector and Quality terminals.
For various Honda motorcycles
Economy - Open Barrel Crimp Tool For 14 - 24 AWG - Works well with these Terminals
Made in USA - NOT recommended for 4mm Bullets and 250 AMP terminals
I have used this and with a little practice you can get factory quality crimps with
it. This tool does the wire crimp, then the insulation seal crimp in 2 steps.
Great for Amphenol Terminals, and Sumitomo 040 and 090 terminals.
You can do 12 AWG, But technically the tool is recommended for 14 - 24 AWG.
$31.55 each ECT39
3 pin Honda Tail light Connector Black
This connector was also use for a 3 pin relay connector for certain makes and Honda