Cycle Terminal
Motorcycle Horn Relay Wiring Harness Kits for dual Hi/Lo Horn set ups for Stock, Fiamm Wolo, Stebel, and others
Keep checking back for links on How to’s, Wiring Diagrams, and other great information.
If you have any Questions, please feel free to Email me Here
Horn relay Kit -
That use .250 Horn Terminals
All quality components,totally plug and play. Horn leads from the relay are 31”, 38”, or 48” inches long.
Chose your horn lead length.
Control side lead length will be the same as horn lead length unless a different length is requested by email.
Total length of battery lead is 10 inches.
Panasonic EW/Matsushita 20 Amp Micro relay,
made in Japan, super light and reliable.
Hi temp flameproof tubing, crosslinked wire 14 and 16 AWG. All crimps are factory quality with shrink tube when needed for additional strain relief.
6mm -
1 x 10, 1 x 15 Amp ATM Fuses
Single Horn HRK1G
31 inch length $48.95
38 inch length $52.95
48 inch length $55.95
For Dual Hi/Lo horns that grounded through the mounting bracket.
Only one positive terminal is needed to the horns. Please make sure this is what you need.
Same as above. But only has one Positive terminal for each horn.
By Request HRK2
Horn relay Kit -
using .250 (6.3mm) Positive and Ground Terminals
Chose your Length in the Cart Options
All quality components, plug and play. Horn leads from the relay are 31”, 38”, or 48” inches long.
Chose your horn lead length.
Control side lead length will be the same as horn lead length unless a different length is requested by email.
Total length of battery lead is 10 inches.
Panasonic EW/Matsushita 20 Amp Micro Relay,
made in Japan, super light and reliable.
Hi temp flameproof tubing, cross-
6mm -
1 x 15, 1 x 20 Amp ATM Fuses included
Can be custom made to your dimensions.
Dual Horn HRK2G
31 inch length $56.95
38 inch length $59.95
48 inch length $64.95